HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 197

Table 29: HAFM application messages (Continued)
Are you sure you want
to overwrite this zone
set?
Are you sure you want
to remove all members
from this zone?
Cannot add a switch to
a zone.
Cannot connect to
HAFM appliance.
Cannot delete product.
Cannot disable Fabric
Binding while Enterprise
Fabric Mode is active.
Cannot display route on
a one switch fabric.
Cannot display route.
Device is not a member
of a zone in the active
zone set.
Edge Switch 2/24 Service Manual
Message
The selected zone set will
be overwritten in the
zoning library.
All members will be
deleted from the selected
zone.
The device that you are
attempting to add to the
zone is a switch, which
cannot be added to a
zone.
The
a remote workstation
could not connect to the
HAFM appliance.
The selected product
cannot be deleted.
The user attempted to
disable fabric binding
through the Fabric
Binding dialog box, but
Enterprise Fabric Mode
was enabled.
The user cannot show
routes between end
devices in a fabric when
configuring Show Route
from the Fabrics menu.
The user cannot show the
route for a device that is
not a member of a zone
in the active zone set.
Description
HAFM
application at
Messages
Action
Click Yes to overwrite or
No to cancel.
Click Yes to delete the
members or No to cancel
the operation.
Specify the port number or
corresponding World
Wide Name (WWN) for
the device you want to add
to the zone.
Verify the HAFM appliance
internet protocol (IP)
address is valid.
Verify the HAFM
appliance-to-product link is
up.
If the link is up, the HAFM
appliance may be busy.
Another Element Manager
instance may be open.
The user may not have
permission to delete the
product.
Disable Enterprise Fabric
Mode through the
Enterprise Fabric Mode
dialog box before
disabling fabric binding.
This error displays when
attempting to show routes
on a fabric with only one
switch. Configure the Show
Route option only for a
multiswitch fabric.
Enable the default zone or
activate the zone for the
device before attempting to
show the route.
213