HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 212

Messages
Table 29: HAFM application messages (Continued)
You must define at least
one E-mail address.
You must define at least
one remote network
address.
You must download the
HAFM client via the web
install.
Zones configured with
port numbers are
ignored in Open Fabric
Mode.
Zones must be defined
before creating a zone
set.
Zoning by port number
is not supported in Open
Fabric Mode.
Zoning name already
exists.
228
Message
At least one e-mail
address must be defined
and configured for e-mail
to be activated.
At least one IP address
for a remote workstation
must be configured for a
remote session to be
activated.
An attempt was made to
download the
application to a remote
workstation (client) using
an improper procedure.
While in Open Fabric
mode, zones configured
using port numbers are
enforced through
world-wide names.
You cannot create a zone
set without any zones
defined for the HAFM.
You cannot specify an
item for zoning by port
number if the
application is set to Open
Fabric Mode.
Duplicate zone names
are not allowed in the
zoning library.
Description
HAFM
HAFM
Edge Switch 2/24 Service Manual
Action
Define an e-mail address
at the Configure E-Mail
dialog box.
Define an IP address for at
least one remote
workstation at the Session
Options dialog box.
Download a compatible
HAFM
version of the
application to the remote
workstation (client) using
the Web install procedure.
Informational message
only–no action is required.
Define zones using the
New Zone dialog box.
Either define zones by
device WWN or change to
Homogeneous Fabric 1.0
mode in the Configure
Operation Mode dialog
Element
box of the
Manager
application.
Modify (to make it unique)
or delete the duplicate
zone name.