HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 206

Messages
Table 29: HAFM application messages (Continued)
No Element Managers
installed.
No routing information
available.
No user selected.
No zone member
selected.
No zone selected.
No zone selected or
zone no longer exists.
No zone set active.
No zone set selected.
No zone set selected or
zone set no longer
exists.
Only attached nodes
can be displayed in this
mode.
222
Message
No Director or Edge
Switch
application is installed on
this workstation.
No information is
available for the route
selected.
A user was not selected
when the command was
attempted.
A zoning operation was
attempted without a zone
member selected.
A zoning operation was
attempted without a zone
selected.
A zoning operation was
attempted without a zone
selected, or the zone
selected no longer exists
in the fabric.
A zone set cannot be
deactivated if there are
no active zones.
A zoning operation was
attempted without a zone
set selected.
A zoning operation was
attempted without a zone
set selected, or the zone
set you selected no
longer exists in the fabric.
Users cannot display
unused ports when
adding ports by
world-wide name.
Description
Element Manager
Edge Switch 2/24 Service Manual
Action
Install the appropriate
Element Manager to this
workstation.
Select a different route and
retry the operation.
Select a user and retry the
operation.
Select a zone member and
retry the operation.
Select a zone and retry the
operation.
Select a zone and retry the
operation.
Informational message
only-no action is required.
Select a zone set and retry
the operation.
Select a zone set and retry
the operation.
Change the add criteria to
Add by Port.