HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 103

Figure 26: Switch Binding - State Change dialog box
2. Ensure the Enable Switch Binding check box is enabled (checked) for both
3. Ensure the Connection Policy radio buttons are compatible for both switches.
4. Click Activate for each switch. The switch binding feature is consistently
Did configuring the switch binding parameters solve the problem?
NO
Contact the next level of support. Exit MAP.
30
A port connection is not allowed because of a fabric binding mismatch. Fabric
membership lists must be compatible for both fabric elements.
1. At the HAFM main window, click Configure > Fabric Binding. The Fabric
Edge Switch 2/24 Service Manual
switches.
enabled for both switches.
YES
The switch appears operational. Exit MAP.
Binding dialog box displays (Figure 27).
Diagnostics
105