Repair Information
186
b. Delete the icon representing the reset switch. At the HAFM application,
choose Discover > Setup. The Discover Setup dialog box displays, as
shown in
Figure
c. Highlight the entry representing the reset switch in the Available
Addresses window and click Remove.
d. At the Discover Setup dialog box, click OK. The switch is no longer
defined to the management server.
e. Change a switch's IP address through the maintenance port at the rear of
the switch. Refer to the HP StorageWorks Edge Switch 2/24 Installation
Guide for information on configuring switch network information.
f.
Identify the switch to the HAFM application. Refer to the HP
StorageWorks Edge Switch 2/24 Installation Guide for information on
identifying the switch to the HAFM application
g. Switch-to-HAFM appliance communication is restored and the procedure
is complete.
52.
Edge Switch 2/24 Service Manual