Event Codes
Events can be recorded in the switch Event Logs at the HAFM appliance, at a
remote workstation if E-mail and call-home features are enabled, or at a simple
network management protocol (SNMP) workstation. An event may also
illuminate the system error (ERR) light-emitting diode (LED) on the front panel.
In addition to numerical event codes, the tables in this appendix also provide the
following information about each code:
250
Message–a brief text string that describes the event.
Severity–a severity level that indicates event criticality as follows:
— 0–informational.
— 2–minor.
— 3–major.
— 4–severe (not operational).
Explanation–a complete explanation of what caused the event.
Action–the recommended course of action (if any) to resolve the problem.
Event Data–supplementary event data (if any) that displays in the Event Log
in hexadecimal format.
Distribution–check marks in associated fields indicate where the event code
is reported (front panel, HAFM appliance, or host).
Edge Switch 2/24 Service Manual