HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 202

Messages
Table 29: HAFM application messages (Continued)
Error removing zone or
zone member.
Error transferring files
< message >.
Fabric Log will be lost
once the fabric
unpersists. Do you want
to continue?
Fabric not persisted.
Field cannot be blank.
Field has exceeded
maximum number of
characters.
File transfer aborted.
HAFM management
session is already active
from this workstation.
HAFM error <error
number 1 through 8 >.
218
Message
The
encountered an internal
error.
An error occurred while
transferring files from the
PC hard drive to the
HAFM
message varies,
depending on the
problem.
When you unpersist a
fabric, the corresponding
Fabric Log is deleted.
The user attempted to
refresh or clear the
Fabric Log after a fabric
was unpersisted. When
you unpersist a fabric,
the corresponding Fabric
Log is deleted.
The data field requires an
entry and cannot be left
blank.
The maximum number of
data entry characters
allowed in the field was
exceeded.
The user aborted the file
transfer process.
An HAFM management
session is open and
active at this workstation.
The
encountered an internal
error (1 through 8
inclusive) and cannot
continue operation.
Description
HAFM
application
application. The
HAFM
application
Action
Try the operation again. If
the problem persists,
contact the next level of
support.
Try the file transfer
operation again. If the
problem persists, contact
the next level of support.
Click Yes to unpersist the
fabric or No to cancel the
operation.
Click OK to continue.
Ensure the fabric is
persisted before attempting
to refresh or clear the
Fabric Log.
Enter appropriate
information in the data
field.
Enter the information using
the proscribed number of
characters.
Verify the file transfer is to
be aborted, then click OK
to continue.
A workstation can have
only one active HAFM
management session.
Contact the next level of
support to report the
problem.
Edge Switch 2/24 Service Manual