HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 210

Messages
Table 29: HAFM application messages (Continued)
The maximum number
of zones per zone set
has already been
configured.
The nickname does not
exist.
The nickname is already
assigned. Either use a
different name or do not
save the name as a
nickname.
The software version on
this HAFM appliance is
not compatible with the
version on the remote
HAFM appliance.
The zoning library
conversion must be
completed before
continuing.
This fabric log is no
longer valid because the
fabric has been
unpersisted.
This network address
has already been
assigned.
This product is not
managed by this HAFM
appliance.
226
Message
The maximum number of
zones that can be
defined in a zone set was
reached.
The entered nickname
does not exist in the
fabric.
The entered nickname
already exists in the
fabric. Each nickname
must be unique.
A remote HAFM
appliance connecting to
the HAFM appliance must
be running the same
software version to log in.
The zoning library
conversion is incomplete
and the requested
operation cannot
continue.
The selected Fabric Log is
no longer available
because the fabric was
unpersisted.
The specified IP address
was assigned and
configured. A unique
address must be
assigned.
The product selected is
not managed by this
HAFM appliance.
Description
Edge Switch 2/24 Service Manual
Action
Delete an existing zone
before adding a new zone
to the zone set.
Configure the nickname to
the appropriate product or
select an existing
nickname.
Define a different
nickname.
Upgrade the software
version on the downlevel
HAFM appliance.
Complete the zoning
library conversion, then
retry the operation.
To start a new log for the
fabric, persist the fabric
through the Persist Fabric
dialog box.
Consult with the customer's
network administrator to
determine a new IP
address to be assigned and
configured.
Select a product managed
by this HAFM appliance or
go to the HAFM appliance
that manages the affected
product.