HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 266

Event Codes
Table 81: Event Code 430 (Continued)
Distribution: Switch
EWS
Event Log
Table 82: Event Code 431
Message: Excessive Ethernet receive errors.
Severity: Informational.
Explanation: Receive error counters for the CTP card Ethernet adapter (sum of all counters)
exceeded a threshold. This does not indicate a CTP failure; it indicates a problem
with the Ethernet cable, hub, or device on the same Ethernet segment. Event data
counters are represented in hexadecimal format with the least significant byte first.
Action: Verify the Ethernet cable, hub, and other devices are properly connected and
operational.
Event Data: Bytes 0 through 3 = sum of all receive errors (total_recv_error).
Bytes 4 through 7 = frame count where received frame had from 1 to 7 bits after
last received full byte (dribble_bits_cnt). CRC error counter updated but frame not
processed.
Bytes 8 through 11 = frame count where received frame had bad CRC
(CRC_error_cnt). Frame not processed.
Bytes 12 through 15 = frame count received with less than 64 bytes (runt_cnt).
Broadcast frames count but do not contribute to threshold. Frame not processed.
Bytes 16 through 19 = frame count received with more than 1518 bytes
(extra_data_cnt). Broadcast frames count but do not contribute to threshold. Frame
not processed.
Distribution: Switch
EWS
Event Log
284
HAFM Appliance
System Event Log
Error LED
HAFM Appliance
System Event
Error Log
LED
E-Mail Call
Home
E-Mail Call
Home
Edge Switch 2/24 Service Manual
Host
Sense Link
Info Incident
Host
Sense Link
Info Incident