HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 223

Table 30:
Invalid port number.
Valid ports are (0–23).
Invalid port swap.
Invalid response
received from switch.
Invalid serial number for
this feature key.
Invalid UDP port
number.
Invalid value for
BB_Credit.
Invalid value for day
(1–31).
Invalid value for
E_D_TOV.
Invalid value for hour
(0–23).
Invalid value for minute
(0–59).
Invalid value for month
(1–12).
Edge Switch 2/24 Service Manual
Element Manager Messages (Continued)
Edge Switch 2/24
Message
Port number must be
within the range of ports
for the specific switch
model. For this model,
the valid port numbers
are 0–23.
Port swap selection is not
allowed.
The switch returned an
invalid response.
The serial number and
the feature key did not
match.
UDP port number must
be an integer from 1
through 65535.
BB_Credit must be an
integer from 1 through
60.
Value for day must be
an integer from 1
through 31.
Value for E_D_TOV must
be an integer from 2
through 600, measured
in tenths of a second.
Value for hour must be
an integer from 0
through 23.
Value for minute must be
an integer from 0
through 59.
Value for month must be
an integer from 1
through 12.
Description
Messages
Action
Enter a port number within
the correct range.
Ensure that each port
selected for swap has not
been previously swapped.
Resend the firmware. If the
condition persists, contact
support personnel.
Ensure that the feature key
being installed is
specifically for this switch
serial number.
Enter a port number from 1
through 65535.
Enter a number from 1
through 60.
Enter a value from 1
through 31.
Enter a value from 2
through 600.
Enter a value from 0
through 23.
Enter a value from 0
through 59.
Enter a value from 1
through 12.
239