HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 49

Fw v06.xx/hafm sw v08.02.00 hp storageworks edge switch 2/24 service manual (aa-rtdxc-te, july 2004)
Hide thumbs Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
Table of Contents

Advertisement

YES
48
Check FRUs for failure symptoms.
Are any amber LEDs associated with Fibre Channel ports illuminated?
NO
49
Is the amber ERR LED at the front of the switch illuminated?
NO
50
Is the amber LED on a power supply illuminated?
NO
The switch appears operational. Exit MAP.
51
You are at the console of an open systems interconnection (OSI) server attached to
the switch reporting the problem. If an incident occurs on the Fibre Channel link
between the switch and server, a link incident record is generated and sent to the
server using the reporting procedure defined in T11/99-017v0.
Was a link incident record generated and sent to the switch-attached OSI server?
YES
Edge Switch 2/24 Service Manual
NO
The switch appears operational. Verify switch operation at the HAFM
appliance. Go to
step
YES
A Fibre Channel port failure is indicated. Go to
event codes. If no event codes are found, go to
Failure and Link Incident
YES
A FRU failure or link incident is indicated. Go to
event codes that identify the failure. Exit MAP.
YES
A power supply failure is indicated. Go to
codes. If no event codes are found, go to
Distribution
Analysis" on page 54. Exit MAP.
NO
Perform switch fault isolation at the HAFM appliance. Go to
20.
Analysis" on page 100. Exit MAP.
"MAP 0100: Power
Diagnostics
step 38
to obtain
"MAP 0600: Port
step 38
to obtain
step 38
to obtain event
step
20.
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks edge switch 2/32

Table of Contents