Advanced Report Filtering Options - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

• Weekly. By default, the report is generated weekly on Sunday at 3:00 a.m. You can
use the drop-down lists to change the day of the week and the time.
• Monthly. If you do not use the drop-down lists to change the time, the report is
generated on the first of the month at 3:00 a.m. You cannot change the day of the
month.
For advanced filtering options, see
4. In the Report Templates section of the screen, select the check boxes for the reports that
you want to generate. For information, see
Report Templates.
5. Configure the Schedule Report section of the screen as explained in the following table:
Table 59. Schedule Report Settings
Setting
Report Name
Reports to keep
Send Report by
Email
6. Still in the Schedule Report section of the screen, click the Add table button to add the report
to the Scheduled Report List. The report is automatically enabled, which is indicated by a
green circle in the leftmost column, enabling the STM to automatically generate the report at
the specified date and time.
The buttons in the Action column of the Scheduled Report List allow you perform the
following actions:
• Edit. Opens the Edit Scheduled Report screen to let you make changes to the report.
• Disable. Disables the automatic generation of the report. The circle in the leftmost
column turns gray.
• Enable. Enables the automatic generation of the report. The circle in the leftmost
column turns green.
• Delete. Deletes the report.

Advanced Report Filtering Options

You can configure advanced filtering options for both generated and scheduled reports.
Although the Time Range drop-down lists apply only to the generated reports and the
Frequency drop-down lists apply only to the scheduled reports, the advanced filtering options
204 | Chapter 6. Monitoring System Access and Performance
ProSecure Web/Email Security Threat Management (STM) Appliance
Advanced Report Filtering Options
Description
Enter a unique name for the report.
Enter the maximum number of reports that you want to be saved in the Scheduled
Report List. The maximum number of report that can be saved is 12. The default number
is 5.
Select the Send Report by Email check box to enable the STM to send the report to the
recipients that you specify in the Email Report to field.
Email Report to The email addresses of the report recipients.
Note:
Report Templates on page 200 and
Use commas to separate email addresses.
on page 204.
Appendix A,