NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 179

ProSecure Web/Email Security Threat Management (STM) Appliance
Table 51. Email Logs Settings (Continued)
Setting
Select Logs to
Send
Format
Size
4. Click Apply to save your settings.
Sending Logs to a Syslog Servers
To enable and configure logs to be sent to a syslog server:
1. Select Monitoring > Logs from the menu. The Logs submenu tabs display, with the Log
Management screen in view (see
2. Locate the Send Logs via Syslog section on the screen (see the following figure), and select
the Enable check box to enable the STM to send logs to a syslog server.
Description (or Subfield and Description)
Select the check boxes to specify which logs are sent via email:
• System logs. The system event logs that include all system errors, informational
messages, configuration changes, and system software updates.
• Email traffic logs. All scanned incoming and outgoing email traffic.
• Web traffic logs. All scanned incoming and outgoing Web traffic.
• Malware logs. All intercepted viruses and spyware.
• Spam logs. All intercepted spam, including spam that was detected through the
blacklist, real-time blacklist, and distributed spam analysis.
• Email filter logs. All emails that are intercepted because of keyword, file type, file
name, password, or size limit violations.
• Content filter logs. All websites, URLs, and FTP sites that are intercepted because
of Web category, blacklist, file type, or size limit violations.
• Application logs. All intercepted application access violations.
Select the types of system logs that are sent via email:
• error. All system errors.
• info. All informational messages.
• conf. All configuration changes.
• update. All system software updates.
Select a radio button to specify the format in which the log file is sent:
• Plain text. The log file is sent as a plain text file.
• CSV. The log file is sent as a comma-separated values (CSV) file.
Select the Zip the logs to save space check box to enable the STM to compress the
log file.
Select the Split logs size to check box to break up the log file into smaller files, and
specify the maximum size of each file in MB. The default setting is 20 MB.
Figure 102
Chapter 6. Monitoring System Access and Performance
on page 178).
| 179