NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 186

To set the poll interval:
1. Click the Stop button.
2. From the Poll Interval drop-down list, select a new interval (the minimum is 5 seconds, the
maximum is 5 minutes).
3. Click the Set Interval button.
To clear the statistics, click Clear Statistics.
The following table explains the fields of the Status, Total Threats, and Threats (Last 7 Days)
sections of the Dashboard screen:
Table 54. Dashboard: Status, Total Threats, and Threats (Last 7 Days) Information
Item Description
Status
System The current CPU, memory, and hard disk usage. When usage is within safe limits, the status bars
show green.
Services The protocols that are being scanned for malware threats. ON, OFF, or HALT is stated next to the
protocol, and the number of active connections for each protocol.
ON indicates that protocol is scanned; OFF indicates that the protocol is not scanned; HALT
indicates that you enabled protocol scanning but the protection license has expired.
Active The number of active connection per protocol.
Connections
Application ON indicates that application control is enabled; OFF indicates that application control is disabled;
Control HALT indicates that you enabled application control but the protection license has expired.
For information about how to configure application control, see
page 127.
Total Threats (Since Last Clear)
Email Displays the total number of:
• Scanned (emails).
• Files blocked (see
• Quarantined (see
• Malware detected (see
• Spam (see
Web Displays the total number of:
• Scanned (files).
• Files blocked (see
• Quarantined (see
• Malware detected (see
• URLs blocked (see
186 | Chapter 6. Monitoring System Access and Performance
ProSecure Web/Email Security Threat Management (STM) Appliance
Email Content Filtering
Email Content Filtering
Customizing Email Anti-Virus Settings
Protecting Against Email Spam
Configuring Web Content Filtering
Configuring Web Content Filtering
Configuring Web Malware Scans
Configuring Web URL Filtering
Configuring Application Control
on page 94).
on page 94).
on page 88).
on page 97).
on page 109).
on page 109).
on page 107).
on page 116).
on