NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 21

ProSecure Web/Email Security Threat Management (STM) Appliance
Rear Panel STM300 and STM600
The rear panels of the STM300 and STM600 are identical.
The following figure shows the rear panel components of the STM300 and STM600:
Figure 6.
From left to right, the STM300's and STM600's rear panel components (excluding the four
fan air outlets) are:
1. Power switch. Switch to turn the STM300 or STM600 on or off. Restarting does not
reset the STM300 or STM600 to its factory defaults.
Note: The STM300 and STM600 do not provide a Reset button. For
information about how to reset the STM300 or STM600 to factory
default settings using the Web Management Interface, see
Reverting to Factory Default Settings
2. AC power socket. Attach the power cord to this socket.
1) Power switch
2) AC power socket
on page 70.
Chapter 1. Introduction | 21