Creating And Deleting User Accounts - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance

Creating and Deleting User Accounts

To create an individual user account:
1. Select Users > Users from the menu. The Users screen displays:
Figure 85.
The List of Users table displays the users with the following fields:
• Enable. The check box allows you to enable or disable the user.
• Name. The name of the user.
• Group. The group to which the user is assigned. If no group is displayed, the user is
not assigned to any group.
• Action. The Edit table button, which provides access to the Edit User screen, and the
Delete table button, which allows you to delete the user.
2. In the Add New Users section of the screen, complete the fields, make your selection from
the drop-down list, and select the radio buttons as explained in the following table:
Table 46. User Settings
Setting Description
Name A descriptive (alphanumeric) name of the user for identification and management purposes.
Groups The drop-down list shows the local groups that are listed on the Groups screen. From the
drop-down list, select the group to which the user is assigned. For information about how to
configure groups, see
Password Select one of the following radio buttons:
• The radio button to the left of the Password field. Enter the password that the user needs
to enter to gain access to the STM. The password can be up to 64 characters.
• Use username as the password. The password that is assigned to the user is identical to
the user name.
Configuring Groups on page 148.
Chapter 5. Managing Users, Groups, and Authentication | 153