NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 66

To enable SNMP and to configure the SNMP settings:
1. Select Administration > SNMP from the menu. The SNMP screen displays:
Figure 40.
2. Select the radio buttons and complete the fields as explained in the following table:
Table 20. SNMP Settings
Setting
SNMP Settings
Do You Want to
Enable SNMP?
66 | Chapter 3. Performing Network and System Management
ProSecure Web/Email Security Threat Management (STM) Appliance
Description (or Subfield and Description)
Select one of the following radio buttons:
• Yes. Enable SNMP.
• No. Disable SNMP. This is the default setting.
Read Community The community string to allow an SNMP manager access to the
MIB objects of the STM for the purpose of reading only. The
default setting is public.
Set Community The community string to allow an SNMP manager access to the
MIB objects of the STM for the purpose of reading and writing.
The default setting is private.