Note:
For the STM150 only, there is an alternate way to restart: Press the
Power button on the rear panel of the STM150 (see
STM150
STM150 reboots.
To shut down the STM:
Locate the Restart & Shutdown section on the Diagnostics screen (this section is not shown
on any of the Diagnostics screen figures in this manual). Click the Shutdown button. The
STM shuts down.
WARNING!
You can shut down the STM using the Web Management Interface,
but you cannot start up the STM using the Web Management
Interface.
220 |
Chapter 6. Monitoring System Access and Performance
ProSecure Web/Email Security Threat Management (STM) Appliance
on page 20). The front panel Test LED flashes, and the
Rear Panel