Monitoring Web Usage - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

Table 56. Dashboard: Service Statistics and Interface Statistics Information (Continued)
Item
Total Malwares Found
Total Emails/Files Blocked
Total Malware Quarantined The total number of detected malware threats that were placed in quarantine.
Total Spam Quarantined
Total URLs Blocked
Total Spam Emails
Interface Statistics
STM600: MGMT (Management), PAIR1 UPLINK, PAIR1 DOWNLINK, PAIR2 UPLINK, PAIR2 DOWNLINK.
STM300: MGMT, UPLINK, DOWNLINK.
STM150: LAN1, LAN2, LAN3, LAN4, WAN.
For each interface the following statistics are displayed:
Status
TX
RX

Monitoring Web Usage

The Web Usage screen shows you how the STM's Web resources are being used. You can
see, for example, which host on the STM uses most resources.
190 | Chapter 6. Monitoring System Access and Performance
ProSecure Web/Email Security Threat Management (STM) Appliance
Description
The total number of detected malware threats.
Virus The total number of detected viruses.
Spyware The total number of detected spyware threats.
The total number of blocked emails and files.
The total number of spam messages that were placed in quarantine.
Note: These statistics apply only to SMTP.
The total number of URL requests that were blocked.
Note: These statistics apply only to HTTP and HTTPS.
The total number of spam emails that were detected.
Note: These statistics apply only to SMTP and POP3.
Blacklist & RBL The total number of emails that were detected through the
spam blacklist and the real-time blacklist (see
Whitelist and Blacklist
Real-Time Blacklist
Distributed Spam The total number of spam messages that were detected
Analysis through distributed spam analysis (see
Spam Analysis
10BaseT Half duplex, 10BaseT Full duplex, 100BaseT Half duplex,
100BaseT Full duplex, or No Link.
The number of transmitted packets in KB, MB, or GB (as stated on the screen).
The number of received packets in KB, MB, or GB (as stated on the screen).
on page 98 and Configuring the
on page 100).
Configuring Distributed
on page 102).
Setting Up the