NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 114

Table 34. Content Filtering Settings (Continued)
Setting
Select the Web Categories You Wish to Block
Select the Enable Blocking check box to enable blocking of Web categories, which is the default setting.
Select the check boxes of any Web categories that you want to block. Use the action buttons at the top of
the section in the following way:
• Allow All. All Web categories are allowed.
• Block All. All Web categories are blocked.
• Set to Defaults. Blocking and allowing of Web categories are returned to their default settings. See
Table 24 on page 85 for information about the Web categories that are blocked by default. Categories
that are preceded by a green rectangle are allowed by default; categories that are preceded by a pink
rectangle are blocked by default.
Web Categorization Schedule
Do You Want this
Schedule to be
Active on All Days
or Specific Days?
Do You Want this
Schedule to be
Active All Day or at
Specific Times
during the Day?
Replace the Content of a Blocked Page with the Following Text
The STM replaces the content of a Web page that is blocked because of violating content with the following
text, which you can customize:
Internet Policy has restricted access to this location belonging to the following categories:
%FULL-CATEGORY-LIST%
Note: Make sure that you keep the %FULL-CATEGORY-LIST% metaword in the text to enable the STM
to insert the categories that the blocked Web page falls under.
114 | Chapter 4. Content Filtering and Optimizing Scans
ProSecure Web/Email Security Threat Management (STM) Appliance
Description
Select one of the following radio buttons:
• All Days. The schedule is in effect all days of the week.
• Specific Days. The schedule is active only on specific days.
To the right of the radio buttons, select the check box for each day that you want the
schedule to be in effect.
Select one of the following radio buttons:
• All Day. The schedule is in effect all hours of the selected day or days.
• Specific Times. The schedule is active only on specific hours of the selected day or
days.
To the right of the radio buttons, fill in the Start Time and End Time fields (Hour,
Minute, AM/PM) during which the schedule is in effect.