NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 135

ProSecure Web/Email Security Threat Management (STM) Appliance
Table 40. Add Exception Settings (Continued)
Setting Description
Domain All Users
User/Group
(continued)
Authenticated
Unauthenticated
Local Groups
Group Membership
by IP
Local User Search
Click the Apply button to apply the exception to all users, both
authenticated and unauthenticated.
Click the Apply button to apply the exception to all authenticated
users. These are users who have actively logged in to the STM and
who have been authenticated.
Click the Apply button to apply the exception to all unauthenticated
users. These are users who have not actively logged in to the STM.
By default, these users are assigned the account name anonymous.
Do the following:
1. From the Name drop-down list, select a local group.
2. Click the Apply button to apply the exception to the selected
local group.
You can specify local groups on the Groups screen (see
and Deleting Groups by Name
Do the following:
1. From the Name drop-down list, select a group that is defined by
its IP address.
2. Click the Apply button to apply the exception to the selected
group.
You can specify groups that are defined by their IP address on the
IP/Subnet Groups screen (see
Address and Subnet on page 151).
Do the following:
1. In the Name field, enter a user name.
2. Click the Lookup button. If the user is found, he or she is listed to
the left of the Apply button.
3. Click the Apply button to apply the exception to the selected
user.
Chapter 4. Content Filtering and Optimizing Scans
Creating
on page 149).
Creating and Deleting Groups by IP
| 135