NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 110

Note: For information about creating custom categories that allow you to
set access exceptions for combinations of Web categories, see
Creating Custom Categories for Web Access Exceptions
page 142.
If you have used the Setup Wizard, you might have already configured the Web category
blocking settings; the Content Filtering screen allows you to modify these settings.
To configure Web content filtering:
1. Select Web Security > HTTP/HTTPS from the menu. The HTTP/HTTPS submenu tabs
display, with the Malware Scan screen in view.
2. Click the Content Filtering submenu tab. The Content Filtering screen displays. Because of
the large size of this screen, it is presented in this manual in three figures (the following
figure, Figure 62
Figure 61. Content Filtering, screen 1 of 3
110 | Chapter 4. Content Filtering and Optimizing Scans
ProSecure Web/Email Security Threat Management (STM) Appliance
on page 111, and Figure 63 on page 112).
on