Registering The Stm With Netgear - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

Registering the STM with NETGEAR

To receive threat management component updates and technical support, you need to
register your STM with NETGEAR. The support registration keys are provided with the
product package (see
The STM supports a bundle key, which is a single support registration key that provides all
three licenses: Web protection, Email protection, and Support & Maintenance.
Note: Activating the service licenses initiates their terms of use. Activate
the licenses only when you are ready to start using this unit. If your
unit has never been registered before, you can use the 30-day trial
period for all three types of licenses to perform the initial testing and
configuration. To use the trial period, do not click Register in
of the following procedure but click Trial instead.
To activate the service licenses:
1. Ensure that your STM is connected to the Internet.
2. Select Support > Registration from the menu. The Registration screen displays:
Figure 31.
50 | Chapter 2. Using the Setup Wizard to Provision the STM in Your Network
ProSecure Web/Email Security Threat Management (STM) Appliance
Service Registration Card with License Keys on page 12).
step 5