NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 171

ProSecure Web/Email Security Threat Management (STM) Appliance
To specify the global user configuration settings:
1. Select User Management > Configuration from the menu. The Configuration screen
displays:
Figure 98.
2. Locate the Sessions Parameters section on screen. Specify the session settings:
• Session Expiration Length. The period after which a session expires and a user
needs to log in again. This setting applies to all users. From the drop-down list, select
either Minutes or Hours. Then, in the field to the left of the drop-down list, enter a
number for the minutes or hours. The session expiration length cannot exceed the
idle time period.
Note: For information about how to set the time-out period for the Web
Management Interface, see
and Timeouts
• Idle Time. The period after which an idle connection is terminated and a user needs
to log in again. This setting applies to all users. From the drop-down list, select either
Minutes or Hours. Then, in the field to the left of the drop-down list, enter a number
for the minutes or hours. The idle time period cannot exceed the session expiration
length.
3. Click Apply to save the session settings.
Changing Administrative Passwords
on page 62.
Chapter 5. Managing Users, Groups, and Authentication | 171