NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 180

Figure 103. Log Management, screen 2 of 3
3. Complete the fields, select the check boxes, and make your selections from the drop-down
lists as explained in the following table:
Table 52. Syslog Settings
Setting Description (or Subfield and Description)
IP Address The IP address of the syslog server.
Port The port number that the syslog server uses to receive logs. The default port number is 514.
Logs Select the check boxes to specify which logs are sent to the syslog server:
• System logs. The system event logs that include all system errors, informational
messages, configuration changes, and system software updates.
• Email traffic logs. All scanned incoming and outgoing traffic.
• Web traffic logs. All scanned incoming and outgoing traffic.
• Malware logs. All intercepted viruses and spyware.
• Spam logs. All intercepted spam, including spam that was detected through the blacklist,
real-time blacklist, and distributed spam analysis.
• Email filter logs. All emails that are intercepted because of keyword, file type, file name,
password, or size limit violations.
• Content filter logs. All websites, URLs, and FTP sites that are intercepted because of
Web category, blacklist, file type, or size limit violations.
• Application logs. All intercepted application access violations.
180 | Chapter 6. Monitoring System Access and Performance
ProSecure Web/Email Security Threat Management (STM) Appliance