NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 91

ProSecure Web/Email Security Threat Management (STM) Appliance
3. Make your selection from the drop-down list and complete the field as explained in the
following table:
Table 27. Email Anti-Virus Exception Settings
Setting
Scan Exceptions
From the drop-down list, specify one of the following actions to be taken when an email attachment exceeds
the size that you specify in the file size field:
• Skip. The file is not scanned but skipped, leaving the end user vulnerable. This is the default setting.
• Block. The file is blocked and does not reach the end user.
The default and maximum file sizes are:
• For the STM600 and STM300, the default setting is to block any attachment larger than 10240 KB. The
maximum file size that you can specify is 51200 KB.
• For the STM150, the default setting is to block any attachment larger than 8192 KB. The maximum file
size that you can specify is 25600 KB.
Note: Setting the maximum file size to a high value might affect the STM's
performance. NETGEAR recommends the default value, which is
sufficient to detect the vast majority of threats.
4. Click Apply to save your settings.
Description
Chapter 4. Content Filtering and Optimizing Scans | 91