NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 36

Table 6. Setup Wizard Step 3: System Date and Time Settings (Continued)
Setting
Use Custom NTP Servers
Manually Enter the Date
and Time
Time Zone
From the drop-down list, select the local time zone in which the STM operates. The correct time zone is required
in order for scheduling to work correctly. You do not need to configure daylight savings time, which is applied
automatically when applicable. Greenwich Mean Time (GMT) is the default setting.
Note: When you select a time zone that is not associated with a location, such as (GMT -08:00) GMT-8, daylight
savings time is automatically disabled. When you select a time zone that is associated with a location, such as
(GMT -08:00) Pacific Time ( US & Canada), daylight savings time is automatically enabled.
36 | Chapter 2. Using the Setup Wizard to Provision the STM in Your Network
ProSecure Web/Email Security Threat Management (STM) Appliance
Description (or Subfield and Description)
The STM regularly updates its RTC by contacting one of the two NTP servers
(primary and backup), both of which you need to specify in the fields that become
available when you select this option.
Note: If you select this option but leave either the Server 1 or Server 2 field blank,
both fields are automatically set to the default NETGEAR NTP servers.
Note: A list of public NTP servers is available at
http://support.ntp.org/bin/view/Servers/WebHome.
Server 1 Name / Enter the IP address or host name of the primary NTP server.
IP Address
Server 2 Name / Enter the IP address or host name of the secondary NTP
IP Address server.
Date Enter the date in the yyyy-mm-dd (year-month-date) format.
Time Enter the time in the hh-mm-ss (hour-minutes-seconds) format.