NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 31

ProSecure Web/Email Security Threat Management (STM) Appliance
3rd level: Submenu tab (blue)
2nd level: Configuration menu link (gray)
1st level: Main navigation menu link (orange)
Figure 17.
The Web Management Interface menu consists of the following components:
• 1st Level: Main navigation menu links. The main navigation menu in the orange bar
across the top of the Web Management Interface provides access to all the configuration
functions of the STM, and remains constant. When you select a main navigation menu
link, the letters are displayed in white against an orange background.
• 2nd Level: Configuration menu links. The configuration menu links in the gray bar
(immediately below the main navigation menu bar) change according to the main
navigation menu link that you select. When you select a configuration menu link, the
letters are displayed in white against a gray background.
• 3rd Level: Submenu tabs. Each configuration menu item has one or more submenu
tabs that are listed below the gray menu bar. When you select a submenu tab, the text is
displayed in white against a blue background.
The bottom of each screen provides action buttons. The nature of the screen determines
which action buttons are shown. The following figure shows an example:
Figure 18.
Any of the following action buttons might be displayed on screen (this list might not be
complete):
• Apply. Save and apply the configuration.
• Reset. Reset the configuration to default values.
• Test. Test the configuration before you decide whether or not to save and apply the
configuration.
• Auto Detect. Enable the STM to detect the configuration automatically and suggest
values for the configuration.
• Next. Go to the next screen (for wizards).
• Back. Go to the previous screen (for wizards).
• Search. Perform a search operation.
Chapter 2. Using the Setup Wizard to Provision the STM in Your Network | 31