NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 136

Table 40. Add Exception Settings (Continued)
Setting Description
Domain LDAP
User/Group User/Group Search
(continued)
RADIUS User
Custom Groups
Start Time The time in 24-hour format (hours and minutes) when the action starts. If you leave these
fields empty, the action applies continuously.
End TIme The time in 24-hour format (hours and minutes) when the action ends. If you leave these
fields empty, the action applies continuously.
136 | Chapter 4. Content Filtering and Optimizing Scans
ProSecure Web/Email Security Threat Management (STM) Appliance
Do the following:
1. From the Domain drop-down list, select an LDAP domain.
2. From the Type drop-down list, select User, Group, or
User&Group.
3. In the Name field, enter the name of the user, group, or user and
group, or leave this field blank.
4. Click the Lookup button. If the user or group is found, it is listed
to the left of the Apply button. If you left the Name field blank, all
users, groups, or users and groups are listed; in this case, make
a selection.
5. Click the Apply button to apply the exception to the selected user
or group.
You can specify LDAP domains, groups, and users on the LDAP
screen (see Creating and Deleting LDAP and Active Directory
Domains on page 161).
Do the following:
1. From the Domain drop-down list, select a RADIUS domain.
2. From the VLAN ID/Name drop-down list, select a VLAN ID or
VLAN name.
3. Click the Apply button to apply the exception to the selected
VLAN.
You can specify RADIUS domains and VLANs on the RADIUS
screen (see Creating and Deleting RADIUS Domains
Do the following:
1. From the Name drop-down list, select a custom group.
2. Click the Apply button to apply the exception to the selected
group.
You can specify custom groups on the Custom Groups screen (see
Creating Custom Groups for Web Access Exceptions
on page 167).
on page 139).