ProSecure Web/Email Security Threat Management (STM) Appliance
STM600 or STM300 uplink and downlink interfaces, or for the STM150's WAN and LAN
interfaces.
To configure the STM's network settings:
1.
Select Global Settings > Network Settings from the menu. The Network Settings
submenu tabs display with the Network Settings screen in view. (The following figure
shows the STM600.)
Figure 32. STM600
The following figure shows the Interface Speed & Duplex Settings section of the Network
Settings screen of the STM300:
Figure 33. STM300
Chapter 3. Performing Network and System Management
| 53