NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 128

To enable and configure application control:
1. Select Application from the menu. The Application Control screen displays.
Because of the size of this screen, and because of the way the information is presented,
the Application Control screen is divided and presented in this manual in three figures:
the following figure shows only the very top part of the screen,
shows the Instant Messaging and Media Application sections, and
shows the Peer to Peer and Tools sections.
Figure 70. Application Control, screen 1 of 3
2. In the Application Settings section of the screen, select the Enable Application Control
check box.
3. Under the Application Settings section of the screen, click Apply. The configurations of the
individual applications can now take effect.
4. For each of the four application sections on the screen—Instant Messaging, Media
Applications, Peer to Peer, and Tools—select the Block check box to specify to block all
applications for that section, or select the individual check boxes to specify to block individual
applications.
128 | Chapter 4. Content Filtering and Optimizing Scans
ProSecure Web/Email Security Threat Management (STM) Appliance
Figure 71 on page 129
Figure 72 on page 129