Configuring Web Malware Scans - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance

Configuring Web Malware Scans

If you have used the Setup Wizard, you might have already configured the Web malware
action and exception scan settings; the Malware Scan screen allows you to modify these
settings.
Whether or not the STM detects Web-based malware threats, you can configure it to take a
variety of actions (some of the default actions are listed in
that are too large, and send notifications, emails, or both to the end users.
To configure the Web-based malware settings:
1. Select Application Security > HTTP/HTTPS from the menu. The HTTP/HTTPS
submenu tabs display, with the Malware Scan screen in view:
Figure 60.
Table 24
Chapter 4. Content Filtering and Optimizing Scans
on page 85), skip files
| 107