NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 134

3. Complete the fields and make your selections from the drop-down lists as explained in the
following table:
Table 40. Add Exception Settings
Setting Description
Action From the drop-down list, select the action that the STM applies:
• Allow. The exception allows access to an application, Web category, or URL that is
otherwise blocked.
• Block. The exception blocks access to an application, Web category, or URL that is
otherwise allowed.
Domain Click the Edit button to open the Applies To screen, which lets you configure a domain,
User/Group group, or individual user to which the exception needs to apply (see the screen later in this
table).
If applicable, on the Applies To screen, click a Lookup button to retrieve a group or user.
When you have made your decision, click an Apply button to add the domain to the Domain
field on the Add Exception screen and the group and user to the User/Group field on the Add
Exception screen.
Note:
Following are the options on the Applies To screen.
134 | Chapter 4. Content Filtering and Optimizing Scans
ProSecure Web/Email Security Threat Management (STM) Appliance
The Domain field can remain blank for some special users or groups.