ProSecure Web/Email Security Threat Management (STM) Appliance
To set time, date, and NTP servers:
1.
Select Administration > System Date and Time from the menu. The System Date and
Time screen displays:
Figure 45.
The top of the screen displays the current weekday, date, time, time zone, and year (in
the example in the previous figure: Current Time: 2009-08-02 00:19:30).
2.
Select the radio buttons, complete the fields, and make your selections from the drop-down
list as explained in the following table:
Table 22. System Date and Time Settings
Setting
System Date and Time
From the drop-down list, select an NTP server, or select to enter the time manually.
Use Default NTP
Servers
Description (or Subfield and Description)
The STM regularly updates its real-time clock (RTC), which it uses for scheduling, by
contacting a default NETGEAR NTP server on the Internet. This is the default setting.
Chapter 3. Performing Network and System Management
| 75