NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 133

ProSecure Web/Email Security Threat Management (STM) Appliance
To set Web access exception rules:
1. Select Global Settings > Exceptions from the menu. The Exceptions submenu tabs
display, with the Exceptions screen in view. This screen shows the Exceptions table,
which is empty if you have not specified any exception rules. (The following figure
shows several exception rules in the table as an example.)
Figure 74.
Note: If text in a field of the table exceeds the width of the column, hold the
cursor over the field to display the entire text.
2. Under the Exceptions table, click the Add table button to specify an exception rule. The Add
Exception screen displays:
Figure 75.
Chapter 4. Content Filtering and Optimizing Scans | 133