NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 47

ProSecure Web/Email Security Threat Management (STM) Appliance
Note: After you have completed the steps in the Setup Wizard, you can
make changes to the content filtering settings by selecting Web
Security > HTTP/HTTPS > Content Filtering. The Content Filtering
screen lets you specify additional filtering tasks and notification
settings. For more information about these settings, see
Web Content Filtering
Table 12. Setup Wizard Step 9: Web Categories Settings
Setting
Select the Web Categories You Wish to Block
Select the Enable Blocking check box to enable blocking of Web categories, which is the default setting.
Select the check boxes of any Web categories that you want to block. Use the action buttons in the following
way:
• Allow All. All Web categories are allowed.
• Block All. All Web categories are blocked.
• Set to Defaults. Blocking and allowing of Web categories are returned to their default settings. See
on page 85 for information about the Web categories that are blocked by default. Categories that are
preceded by a green rectangle are allowed by default; categories that are preceded by a pink rectangle are
blocked by default.
on page 109.
Description (or Subfield and Description)
Chapter 2. Using the Setup Wizard to Provision the STM in Your Network
Configuring
Table 24
| 47