NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 126

To configure the FTP scan settings:
1. Select Web Security > FTP from the menu. The FTP screen displays:
Figure 69.
2. Complete the fields, select the check boxes, and make your selections from the drop-down
lists as explained in the following table:
Table 38. FTP Scan Settings
Setting Description
Action
FTP Action
126 | Chapter 4. Content Filtering and Optimizing Scans
ProSecure Web/Email Security Threat Management (STM) Appliance
From the FTP drop-down list, specify one of the following actions to be taken when an
infected FTP file or object is detected:
• Quarantine file. The FTP file or object is placed in quarantine, a malware
quarantine log entry is created, and depending on the nature of the malware threat,
also a virus log entry or a spyware log entry.
• Delete file. This is the default setting. The FTP file or object is deleted, and
depending on the nature of the malware threat, a virus log entry or a spyware log
entry is created.
• Log only. Depending on the nature of the malware threat, only a virus log entry or
a spyware log entry is created. The FTP file or object is not deleted.