NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 156

The lower part of the NETGEAR Configuration Manager Login screen (see the previous
figure) provides a User Portal Login Link that lets you open the User Portal Login screen:
Figure 88.
After a user has logged in through the User Portal Login screen, the Authentication screen
displays:
Figure 89.
The Authentication screen shows the IP address with which the user has logged in and lets a
user change his or her password.
If you do not use the DC agent in your configuration (see
Agent on page 164), after completing a session, a user needs to log out by following these
steps:
1. Return to the User Portal Login screen (see
Note: The user needs to know how to return to the User Portal Login screen.
The administrator needs to provide the User Portal Login URL:
https://<IP_address>/~common/cgi-bin/user_login.pl or
https://<FullyQualifiedDomainName>/~common/cgi-bin/user_login.pl
Alternately, the administrator can provide the NETGEAR Configuration
Manager Login screen, from which the user can access the User Portal Login
screen: https://<IP_address> or https://<FullyQualifiedDomainName>
156 | Chapter 5. Managing Users, Groups, and Authentication
ProSecure Web/Email Security Threat Management (STM) Appliance
Figure
Understanding the ProSecure DC
88).