NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual page 101

ProSecure Web/Email Security Threat Management (STM) Appliance
Note: By default, the STM comes with two pre-defined blacklist providers:
Spamhaus, and Spamcop. You can add a maximum of 16 blacklist
providers to the RBL sources.
To enable the real-time blacklist:
1. Select Email Security > Anti-Spam from the menu. The Anti-Spam submenu tabs
display, with the Whitelist/Blacklist screen in view.
2. Click the Real-Time Blacklist submenu tab. The Real-Time Blacklist screen displays:
Figure 57.
3. Select the Enable check box to enable the Real-Time Blacklist function.
4. Select the Active check boxes to the left of the default blacklist providers (Spamhaus and
Spamcop) that you want to activate. A Terms of Service popup window displays.
5. Read the terms of service in the Terms of Service field. If you agree with these terms, click
OK.
6. Click Apply to save your settings.
Chapter 4. Content Filtering and Optimizing Scans | 101