Dhcp Table Screen - ZyXEL Communications Prestige 2602R Series User Manual

Table 66 System Status: Show Statistics (continued)
LABEL
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
Collisions
Voice Statistics
Phone
Status
TxPkts
RxPkts
Tx B/s
Rx B/s
Talk Time
Poll Interval(s)
Set Interval
Stop

19.3 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If set to None, DHCP service will be disabled and you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Click Maintenance, and then the DHCP Table tab. Read-only information here relates to
your DHCP status. The DHCP table shows current DHCP Client information (including IP
Address, Host Name and MAC Address) of all network clients using the DHCP server.
Chapter 19 Maintenance
DESCRIPTION
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This is the number of collisions on this port.
The voice statistics fields apply to calls currently being made or received on a
telephone connected to one of the Prestige's phone ports.
This field displays the Prestige's phone port number.
Status This field displays Onhook when the telephone handset is in it's cradle
and Offhook when telephone handset is out of it's cradle.
This field displays a call's number of RTP (Real time Transport Protocol) packets
that have been transmitted. RTP is used to handle voice data transfer. This field
displays 0 again after the call ends.
This field displays a call's number of RTP packets received. This field displays 0
again after the call ends.
This field displays a call's number of bytes of RTP traffic transmitted in the last
second. This field displays 0 again after the call ends.
This field displays a call's number of bytes of RTP traffic received in the last
second. This field displays 0 again after the call ends.
This field displays a call's duration. This field displays 0 again after the call ends.
Type the time interval for the browser to refresh system statistics.
Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Click this button to halt the refreshing of the system statistics.
Prestige 2602R Series User's Guide
217