Copying Information To A File - Ricoh AP2600N User Manual

UNIX Configuration
Note
❒ For the user name and password input nothing, and then press the {RETURN}
key.
Parameters that can be used with rsh, rcp and ftp:
1
Parameter
status
info
prnlog
syslog

Copying Information to a File

Use the rcp or ftp command to copy information about the specified parameters
to a file.
You can use these commands for BSD and System V UNIX.
Note
❒ The same parameters are used as those above.
% rcp host_name:parameter file_name
% ftp host_name
User: user_name
password:
ftp> get parameter file_name
Note
❒ For the user name and password input nothing, and then press the {RETURN}
key.
14
Information returned
Status of the printer.
Information about print jobs.
Information about the paper tray, output tray
and printer language of the printer.
Record of the last 16 jobs printed.
Record of messages about the Network Interface
Board.
Reference
Network Interface Board
Operating Instructions
provided as a PDF file on
the CD-ROM labeled "Op-
erating Instructions".
Printer Reference provid-
ed as a PDF file on the CD-
ROM labeled "Operating
Instructions".
Network Interface Board
Operating Instructions
provided as a PDF file on
the CD-ROM labeled "Op-
erating Instructions".