Setting Up A Client Computer - Ricoh AP2600N User Manual

Setting up a Client Computer

This section describes the procedures for setting up a client on a network that
uses Windows 2000, Windows NT Server or Windows NT Workstation as a
print server.
To print from Windows 95/98/Me, you must install the printer driver and
change the printer port to the print server.
Windows 95/98/Me
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000 or Windows NT print server. Do not begin the fol-
lowing procedure until the client has been set up and configured correctly.
A
Install the printer driver as a local printer.
Reference
For more information about installing the printer driver, see the "Setup
Guide" that comes with the printer.
Note
❒ Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
Click [Start], point to [Settings], and then click [Printers].
C
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties].
D
Click the [Details] tab, and click [Add Port].
E
Click [Network], and click [Browse].
Windows 2000 or
Windows NT Print Server
Setting up a Client Computer
1
13