Paper and Other Media
Storing Paper
Paper should always be stored properly. Improperly stored paper might result
in poor print quality, paper misfeeds or printer damage.
Recommendations are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep open reams of paper in the package in which the paper came.
3
Types of Paper and Other Media
❖ ❖ ❖ ❖ Plain paper
• If you print on paper heavier than 155 g/m
The bypass tray can hold paper up to 162 g/m
• If you load paper heavier than 155 g/m
the printer to Thick Paper mode using the operation panel.
• If paper is curled or bent, correct it before loading.
❖ ❖ ❖ ❖ OHP transparencies
• Load only one OHP transparency at the same time onto the bypass tray.
• When loading an OHP transparency onto the bypass tray, set the printer
to Transparency mode with the operation panel.
• Be careful not to touch the print side of the OHP transparencies, otherwise
the print side gets dirty or damaged, and results in poor print quality.
• When printing on an OHP transparency that has a print side, load it facing
down onto the bypass tray.
❖ ❖ ❖ ❖ Adhesive labels
• Load only one adhesive label at the same time onto the bypass tray.
• Use adhesive labels in which the whole side can be printed on.
• Do not use adhesive labels having exposed glue.
• If the print side is coated, print quality might be reduced, as the toner
might not fuse well.
34
2
(41 lb), use the bypass tray.
2
(43 lb) in weight.
2
(41 lb) onto the bypass tray, set