Ricoh AP2600N User Manual page 347

IPP
Use the ipp command to configure the IPP settings.
❖ ❖ ❖ ❖ Viewing setting
The following command displays the current IPP settings.
msh >ipp
Example output:
timeout=900(sec)
auth basic
• The "timeout" setting specifies how many seconds the computer keeps try-
ing to access the network printer to send print jobs when no connection
could be made.
• The "auth" setting indicates the user authorization mode.
❖ ❖ ❖ ❖ IPP timeout configuration
Specify how many seconds to wait before canceling a print job if it has been
interrupted for some reason. The range of time can be changed between 30 to
65535 seconds.
msh>ipp timeout {30 -65535}
❖ ❖ ❖ ❖ IPP user authorization configuration
Use the IPP user authorization to restrict users that can print with IPP. The
factory default is "off" .
ipp auth {basic|digest|off}
• "basic" and "digest" are user authorization setting.
• "off" removes a user's authorization.
Note
❒ If you select "basic" or "digest", see next section "Entry the IPP User Autho-
rization" for how to configure the user name. Up to ten user names are
available.
❖ ❖ ❖ ❖ Configuring IPP user authorization
Use the following command:
ipp user
The following message appears.
Input user number (1 to 10):
Type the number, user name and password.
IPP user name:user1
IPP password:*******
After configuring the settings, the following message appears.
User configuration changed.
Remote Maintenance by telnet
6
83