Host Interface Menu; Host Interface Parameters - Ricoh AP2600N User Manual

Making Printer Settings with the Operation Panel

Host Interface Menu

There are three menu items in the "Host Interface" menu.
• I/O Buffer
• I/O Timeout
• Network Setup
Note
❒ The "Network Setup" appears only when the optional Network Interface
Board is installed. For more information about the "Network Setup", see "Con-
figuring the power for the Network with the Operation Panel" in the "Setup Guide".

Host Interface Parameters

Menu
I/O Buffer
6
I/O Timeout
Network Setup
120
You can set the size of the I/O Buffer. Normally it is not necessary
to change this setting.
16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB
Note
❒ Default: 32 KB
You can set how many seconds the printer should wait before
ending a print job. If data from other port often appears in the
middle of the print job, you should increase the timeout value.
10 seconds, 15 seconds, 20 seconds, 25 seconds, 60 seconds
Note
❒ Default: 15 seconds
❖ ❖ ❖ ❖ IP Address
You can set the IP Address.
Note
❒ Default: 011.022.033.044
Reference
See "Configuring the Printer for the Network with the Opera-
tion Panel" in the Setup Guide.
❖ ❖ ❖ ❖ Subnet Mask
You can set the Subnet Mask.
Note
❒ Default: All zero
Reference
See "Configuring the Printer for the Network with the Opera-
tion Panel" in the Setup Guide.
Description