Configuring The Printer; Changing The Printer Name; Changing The Zone - Ricoh AP2600N User Manual

Macintosh Configuration

Configuring the Printer

Use the operation panel to activate the EtherTalk protocol. (The factory default
is active.)
Reference
For more information about configuration, see the "Setup Guide" that comes
with the printer.

Changing the Printer Name

If the network has several same model printers, the names will be the same.
Printers that have the same name will have their names changed slightly in the
Chooser. For example, three printers named "printer" will appear in the chooser
as "printer0", "printer1" and "printer2".
To change the printer name in the Macintosh EtherTalk environment, use Print-
5
er Utility for Mac included on the CD-ROM labeled "Drivers and Utilities".

Changing the Zone

To change the zone configuration in the Macintosh EtherTalk environment, use
Printer Utility for Mac included on the CD-ROM labeled "Drivers and Utilities".
Reference
For more information about using Printer Utilities for Mac, see PostScript 3
Operating Instructions Supplement provided as a PDF file on the CD-ROM
labeled "Operating Instructions".
72