Ricoh AP2600N User Manual page 409

B
Get the installation shell script from the printer.
A Move to the directory you want to copy the installation shell script to.
B Use ftp to connect to the printer with the IP address that you just config-
ured.
# ftp 192.168.15.16
Connected to 192.168.15.16
220 printer FTP server ready.
name (192.168.15.16:root:)
C When a user name is requested, ignore and press the { { { { RETURN} } } } key.
331 Password required for root.
Password:
D When a password is requested, ignore and press the { { { { RETURN} } } } key.
230 User root logged in.
ftp>
E Type the following to get the installation shell script.
ftp> get install
F Close the ftp session.
ftp> bye
221 Goodbye.
#
C
Run the installation shell script.
# sh ./install
Note
❒ Insert a period and slash before the current directory.
D
Enter a number to select the workstation OS that you are using.
Network printer install shell
Copyright RICOH CO.,LTD. 1994-2000
Select your workstation OS type.
1. SunOS 4.x.x
2. Solaris 2.x, Solaris 7-8 (SunOS5.x)
3. HP-UX 8.x,9.x,10.x,11.x
4. UnixWare
5. Linux
6. other
Enter <1-6>:
2
Note
❒ SunOS and UnixWare appear on the screen, but they are not supported.
Use Solaris, HP-UX or Linux.
❒ If you select "6", the installation shell script exits.
Using the Installation Shell Script
1
3