Installing Portnavi - Ricoh AP2600N User Manual

Note
❒ If you use the Multidirect Print port for printing, the port is switched auto-
matically to the PortNavi port.
❒ Be sure to close all applications before beginning the installation process. In-
stalling PortNavi may require the computer to be restarted.

Installing PortNavi

Follow the procedure below to install PortNavi.
A
Configure the IP parameters on the Network Interface Board using the op-
eration panel.
Reference
For more information about setting IP parameters, see "Configuring the
printer for the Network with the Operation Panel" in the"Setup Guide"
that comes with the printer.
B
Insert the CD-ROM into the CD-ROM drive.
Note
❒ If the installer starts automatically, you can use it to install PortNavi. Fol-
low the instructions on the screen.
C
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
D
On the [Install/Uninstall] tab, click [Install].
E
Click [Next >].
F
Type the name of the CD-ROM drive in the [Command line for installation pro-
gram] box, followed by ":\NETWORK\PORTNAVI\DISK1\SETUP.EXE"
(do not include the quotation marks), and then click [Finish].
Note
❒ An example would be "D:\NETWORK\PORTNAVI\DISK1\SETUP.EXE"
when the drive letter is "D".
G
From the [Choose Setup Language] list, select the language you want to use,
and then click [OK].
H
After the [Welcome] dialog box appears, click [Next >].
Follow the instructions on the screen.
After installation is complete, configure the printer port with PortNavi. ⇒
P.39 "Setting Up the Printer Driver"
Note
❒ If the dialog box asking if you want to restart the computer appears, select
[Yes, I want to restart my computer now.].
Using PortNavi
3
37