Ricoh AP2600N User Manual page 290

Windows 2000 Configuration
E
Select the printer.
TCP/IP
A Click the printer you want to use, and then click [OK].
Note
❒ Printers that respond to an IP broadcast from the computer will be dis-
2
played. To print to a printer not listed here, click [Specify Address] and
then type the IP address or host name.
NetBEUI
A Click [NetBEUI].
A list of printers that can be printed by the NetBEUI protocol appears.
B Click the printer you want to use, and then click [OK].
Note
❒ Printers that respond to an broadcast from the computer will be dis-
played. To print to a printer not listed here, click [Specify Address] and
then type the NetBEUI address. Confirm the NetBEUI address on the
configuration page. For information about the printing of configuration
page, see the "Setup Guide" that comes with the printer.
❒ You cannot print to printers beyond routers.
IPP
A Click [IPP].
The IPP setting dialog box appears.
B In [Printer URL], type "http://(printer's IP address)/printer" as the IP ad-
dress of the printer.
C As necessary, type the names to distinguish the printer in [IPP Port Name].
Type a name differing from those of any existing port names.
If you omit this, the address entered in [Printer URL] will be set as the IPP
port name.
(Example IP address is 192.168.15.16)
http://192.168.15.16/printer
D If using a proxy server and IPP user name, click [Detailed Settings] and
configure the necessary settings.
Note
❒ For more information about these setting, see Multidirect Print Help.
F
Click [OK].
26