Ricoh AP2600N User Manual page 285

Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as "FILE", then delete it. For more information about PortNavi, see PortNavi
Help.
A
From the [Printers] window, click the icon of the printer which uses Port-
Navi to print. On the [File] menu, click [Properties].
B
Click the [Ports] tab and confirm that the PortNavi port is shown in the [Print
to the following port(s)] box.
Remember the port name because this port should be deleted later.
C
Click the [FILE] check box in the [Port] column.
D
Click [OK] to close the Printer Properties.
The port which is currently in use is changed.
E
Open the Printer Properties of the same printer.
F
Click to select the [Ports] tab.
G
At the [Port] column in the [Print to the following port(s)] dialog box, click to se-
lect the PortNavi port name as confirmed in step B B B B .
H
Click [Delete Port].
I
When the confirmation message appears, click [Yes].
The port is deleted.
J
Click [Close] to close the Printer Properties.
Uninstalling PortNavi
Preparation
Before uninstalling PortNavi, make sure that:
• The port settings dialog box is closed.
• No printer is using the PortNavi port as a printer port.
A
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
B
Click the [Change or Remove Programs] tab, click [PortNavi], and click [Change/
Remove].
C
After a confirmation message appears, click [Yes].
UninstallShield removes all of the components of PortNavi.
Using PortNavi
2
21